 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| EMC-Power Line Filters for 1-Phase Systems FMAB Series, all-purpose filters to Protection Class I, conform to EN 133200, UL 1283 and IEC 60950 Nominal current: Rated voltage UR (Umax): Attenuation: Leakage current: Test voltages: Climatic category: 50% saturation typ.: Inrush current: MTBF @ 40 C / UR (Umax): * without resistor 12 - 30 A @ 40 C 125/250 VAC 50/60 Hz High for Industrial applications L/N E 2.7 kVDC, 2 sec L N 1.7 kVDC, 2 sec * 25/100/21 acc. to IEC 60068-1 2 to 3 x IN @ 20 C 1.5 x IN 1 min. per hour > 200'000 h acc. To MIL-HB-217 F The SCHURTER high current filter family FMAB was specially developed for the following industrial applications: * * * * Frequency Converters Stepper Motor drives UPS-Systems Inverters * Standard version include insulated safety screw terminals. * Key features of the high current filter range include: - easy, space saving installation - high symmetrical and aymmetrical mode attenuation (from 10 kHz to 300 MHz) * To maximize the filter performance in the application, the following EMC-rules should be considered: - physical separation of filter input and output lines - physical separation of the interference source itself - dedicated earth connection for the filter (min. 10 mm 2) Optional Version: * Wire lead connections instead of the screw terminals Contact Schurter for minimum order quantity International approvals centers (i.e. UL) today demand high filter performance with regard to attenuation and loading characteristics. During the design, special considerations were made for applications that require high attenuation at the specified maximum load or where asymmetrical loading of the filter occur independently from line impedance at the installation site. The implemented filter range wholly conforms to the requirements of the international standards EN 133200, UL 1283, IEC 60950 and VDE 0565 The filter series are deally suited for applications with EN 55011, EN 55014 and EN 55022 requirements. Circuit diagram Order Numbers and Technical Data Type FMAB IN (1) @ a 40 C UR (Umax) LN (2) Resistance L-L' 15% [m] 14.2 5.8 2.4 Power dissipation total 15% [W] 4 4.6 4.3 [mA] < 5.2 < 5.2 < 5.6 Leakage current (3) @ 250 V / 50 Hz C1 (X2) C2 (Y2) C3 (Y2) C4 (X2) R Case Terminal blocks -30%/+50% [A] 5500.2064 5500.2065 5500.2066 12 20 30 [VAC] 250 250 250 [mH] 2 x 10 2 x 3.5 2 x 1.5 20% 20% 20% 20% [F] 2.2 2.2 2.2 [nF] 10 10 15 [nF] 47 47 47 [F] 1.0 1.0 1.0 [M] 1 1 1 24-2 24-2 24-6 [mm2] 4 4 6 (1) Current derating over 40C : I = IN x (100-a)/60 (2) Nominal inductance measured according to EN 138100, see introduction of this catalog, paragraph 3.4 (3) Measured according to IEC 60950 5.2.3 Annex D, see introduction of this catalog, paragraph 3.5 Insertion loss 32 www.schurterinc.com EMC-Power Line Filters for 1-Phase Systems FMAB and FMBB Series, Cases Case 16-2 Case 24-2 Case 24-6 Case 31-2 Case 31-6 www.schurterinc.com 33 |
Price & Availability of 5500206
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |